Hour 9
Intro to Engineering
Allen Sam
Progress on project

Added speaker notes for presentation and verify all the information on there

Comments

Post a Comment

Popular posts from this blog

Image
Day 15  Intro to Engineering Allen Sam 7-3-18 Activities 7.3 and 7.4 7.3 Tolerances 1.       Study the drawings below to identify specified tolerances. a.       Highlight each dimension that has a tolerance associated with it using something like a highlight marker. b.       Identify the type of tolerance in each highlighted example by labeling each tolerance dimension with one of the following: limit dimensions, unilateral tolerance, or bilateral tolerance. c.       Label each identified tolerance with a separate letter, A through Z. d.       Beginning on a new page in your engineering notebook for each part, record the letter of each tolerance identified on that part drawing, the type of tolerance, a short written phase that describes the dimensional variation allowed for that dimension, the tolerance (a number representing the total allowed dimensional variation), and an explanation as to why that particular dimension requires a tolerance. You may wish to
Read more
Image
Day 13 Intro to Engineering Allen Sam 6-28-18 Activity 5.6a Aluminum Object Example 1 1.       What is the volume of the part? A.      1.875 in.³ B.      1.125 in.³ C.     1.375 in.³ D.     2.125 in.³ c.1.375                  2.                                                       What is the density of aluminum in grams per cubic centimeter? (This may require research. Be sure to document your source.)  2.700g/cm^3 3.                                           What is the density of aluminum in pounds per cubic inch? Show your work including all conversion factors.    0.0975437 pounds per cubic inch 2.700 x 2.54^3 / 453.592 4.                                           Find the mass of the object (in pounds-mass) if it is made of aluminum. A.      0.125 lb m B.      0.135 lb m C.     0.257 lb m D.     0.312 lb m b. 0.135lb m 5.       What is the surface area of the part? A.      7.250 in.² B.     
Read more
Image
Day 12  Intro to Engineering Allen Sam 6-27-18 Activities 5.5a and 5.5b 5.5a   Conclusion:  1.        What 3D CAD functions could be used to create a wire coat hanger? I would use the sweep, loft, and revolve functions of CAD to create the coat hanger from the front view and a side view. Activity 5.5b \ Conclusion:  1.    What CAD feature would be used to most efficiently model a baseball bat (Extrude, Loft, Revolve, Sweep)? Explain your answer. I would use the revolve tool to create the baseball bat because the baseball bat is cylindrical     2.    How does a 3D CAD solid model program display the progression of work involved in creating a model? You can see progression of the work of a project by showing the constraints and CAD features that were used. 3.    If a mistake is made, how does the user make a correction without using the undo function? The user would either use the delet
Read more